Therminnov System
THERMINNOV SYSTEM
INSULATION SYSTEM
EXTERNAL THERMAL
The ThermInnov System is Tintas 2000's external thermal insulation system (ETICS). It is one of the most effective solutions to achieve a high level of indoor thermal comfort in buildings, with lower energy consumption associated with heating/cooling needs.
For the correct application of the ThermInnov System, Tintas 2000 developed an Application Manual with the various execution phases and some construction details.
ADVANTAGES
Elimination of thermal bridges
Constant condensation of water vapor on cold walls, due to thermal bridges, causes mold and fungi to form, leading to wall and ceiling deterioration.
Improved wall waterproofing
It improves wall waterproofing and the materials that make up the outer layers of the system have properties that ensure rainwater resistance.
Health
Reduction of mold and fungi, which cause various types of respiratory allergies.
Winter and summer thermal comfort
It is efficient not only in preventing heat loss from inside to outside, but also in limiting heat entry through facades.
Masonry protection
It protects masonry from hygrometric actions that cause degradation through cracking.
Rehabilitation without relocation
It can be applied without residents being relocated, or even disturbed.
Energy savings
With truly efficient thermal insulation, heating and cooling energy savings can reach up to 30%.
Aesthetic rehabilitation
It enables facade renovation with various final finish types.
Respect for the environment
Reduction of carbon footprint resulting from HVAC equipment operation.
European technical assessment (ETA/15/0804)
obtained in 2017, based on European-level defined parameters, which ensure system compliance with ETAG 004 Guide
THERMINNOV SYSTEM COMPONENTS
Substrate
Flat vertical exterior surfaces of new or existing buildings (rehabilitation), and also horizontal or inclined surfaces not exposed to precipitation.
Thermal insulation
The thermal insulation is intended to increase the thermal resistance of the surface on which the system is applied.
Fixing anchors
They are plastic elements (PVC) and serve as support/fixation for the thermal insulation to the substrate.
Reinforcement mesh
Reinforcements are generally fiberglass meshes with polyamide coating, which gives them anti-alkaline properties against the aggressiveness of cements.
Primer
After applying the final mortar coat, a primer should be applied to even out surface absorption, provide anti-alkaline protection and improve adhesion of the final coating layer.
Final coating
In the ThermInnov System, the preferred finish is Crepimil Extra. Crepimil Extra is an acrylic decorative facade coating, with high weather resistance, good light fastness and water impermeability. It can even be applied in winter,
under low-temperature conditions (minimum 5 C) and higher relative humidity.
